EN

Winding Tools

Calculators, utilities and guides to design and verify electrical windings for motors and transformers

Available tools

Turns Calculation

Calculate the number of turns per phase, layers and pitches, with section and current verification

Enamelled Wire Equivalences

Search different diameter combinations, both IEC and NEMA standards

Electrical machine fundamentals

Theory for each type of machine: three-phase and single-phase induction motors, DC machines, synchronous machines and transformers.

Electrical machine analysis

Equivalent-circuit calculators: currents, torque, losses and efficiency from the nameplate or from test results.

Motor connection and starting

How three-phase motors are connected and how they behave depending on their terminal box: star-delta, Dahlander, part winding, two windings and dual voltage.

Documentation

About these tools

Rewinding a motor means reproducing the original winding or adapting it to a new voltage, frequency or speed. The turns calculators start from the stator data (bore, core length, number of slots and poles) or from the turns per slot, and check the air-gap flux density, the current density and whether the wire fits in the slot.

When the exact wire diameter is not available, the equivalence tables look for combinations of several parallel wires with the same cross-section, both in millimetres (IEC) and in AWG gauges (NEMA). The documentation section has guides on induction and single-phase motor fundamentals, their connections and the basic rules of electromagnetism.

Always record the data of the original winding before rewinding: the calculations help you check and adapt, they do not replace measurement.