EN

Three-phase windings

Tool for drawing three-phase windings

Three-phase motor winding: input data

Nameplate data and stator dimensions are not used in the calculation: it does not yet work out turns or wire size. Always review the diagram before winding; you can check it in Rotating field.

Fill in the motor data. Fields that do not apply to your case are hidden automatically.

How do you want to do it?
The winding you choose in section 5 is drawn, if it can be made with your data. All possible windings are proposed for whatever you leave unselected, from best to worst field; choose one and it is drawn.
1. Nameplate data
Optional
Optional
A
Optional
Optional
2. Voltage and connection
Optional
Dual voltage
Optional
V
Optional
V
Optional
3. Poles
I know…
rpm
The poles will be worked out from the speed and frequency
4. Stator
mm
Optional
mm
Optional
mm²
Optional
5. Winding layout
Optional
Optional
Concentric by poles with q of 3 or more. Each one adds a coil per group; the outer ones have ½ turns and share slots with the neighbouring group, on the way to double layer. The field does not change.
Optional
Optional
The three phase currents add up to zero: at the instant drawn, one runs the opposite way.
Coil pitch
Optional: slots taken off the full pitch (0 = full pitch, 1 = one less). If left empty, the closest to 5/6 of the pole pitch.