EN

Induction Motor Fundamentals

Introduction

An asynchronous or induction motor is any AC motor whose moving part rotates at a speed different from the synchronous speed. The synchronous speed depends on the number of poles in the winding and the frequency of the supply. The difference between the two speeds is called slip:

$$ \delta = \frac{n_1 - n_2}{n_1}\cdot 100 $$

Where:

$$ \delta = \text{slip in %} $$

$$ n_1 = \text{synchronous speed in rpm}$$

$$ n_2 = \text{actual speed in rpm}$$

Slip depends on several factors and is greater in small motors. It typically ranges from about 10% in low-power motors to less than 1% in large motors. In some cases, such as hoist motors, the slip can become negative, and the motor then works as a brake.

Induction motors are known for their simple and rugged construction, easy manufacture and rewinding and, most importantly, low maintenance costs. They are also very easy to operate, and with variable frequency drives their starting, speed and stopping are easy to control, which is why they are found in every sector, both industrial and domestic.

History

It would be unfair to describe the invention of this machine as a single, individual event. The contributions to electromagnetism made by scientists such as François Arago and Michael Faraday laid a solid foundation for what came next, when visionaries such as Walter Baily, Ottó Bláthy, Galileo Ferraris and Nikola Tesla gradually developed what we now know as the induction motor. Tesla was the only one of them to patent these motors, and he championed them against direct-current technology in the so-called war of the currents at the end of the 19th and beginning of the 20th century. As many of you know, alternating current won, not only for motors but also for generation, transformation and distribution. None of this prevented Tesla from dying poor.

Operating principle

These motors have two electrical circuits: one in the stator, a cylindrical ring of laminated magnetic steel with longitudinal slots, and one in the rotor, made either of coils short-circuited externally or simply of copper or aluminium bars short-circuited at their ends by rings of the same material. The latter is the squirrel-cage motor, which today accounts for the vast majority of AC motors.

The induction motor works on the principle of mutual induction. When alternating current is applied to the stator, a magnetic field is created whose lines cross the air gap, pass through the rotor and close their path through the outer part of the stator (the yoke), as shown in idealised form in the following figure:

The figure shows the cross-section of a 2-pole, 6-slot three-phase motor, with the direction of its currents at an instant t of the cycle, according to the Corkscrew rule.

X indicates current flowing into the screen.

O indicates current flowing out of the screen.

When alternating current is applied to the motor, the magnetic field becomes a rotating field, that is, the poles move to the right or to the left (depending on the connection). This field passes through the rotor and induces a voltage in its conductors or bars, producing a torque that makes the rotor turn, or at least try to turn, at synchronous speed. In a two-pole motor, the N pole takes half a cycle to reach the position of the adjacent S pole, and another half cycle to travel the same distance and return to where it started. This happens because the direction of the currents in the different coils changes in turn at the supply frequency, as shown in the following figure (slowed down), which shows a typical phasor diagram of a three-phase supply.

Phase R

Phase S

Phase T

N
   Phase voltage: V      
VRN = 0V
VSN = 0V
VTN = 0V
VRS = 0V
VST = 0V
VTR = 0V

In a 4-pole motor, the N pole takes half a cycle to reach the position of the neighbouring S pole (90 mechanical degrees); in other words, the poles move more slowly around the stator. The more poles a motor has, the less the rotor turns in each AC cycle. In industrial applications speed is controlled with drives (when fine control is needed) or with mechanical gearboxes, which makes windings with more than 8 poles almost unnecessary.

To see how the magnetic fields move, start the animation in the previous figure if it is not already running.

The figure shows a 4-pole motor with 2 coils per phase connected in series. You can see how the rotor follows the magnetic fields as they move around the stator.

ROTOR U V W X Y Z

Reference table

Poles RPM (50Hz) RPM (60Hz)
2 3000 3600
4 1500 1800
6 1000 1200
8 750 900
⚠ Technical note: the actual speed is always slightly lower because of the motor's slip.