Field lines, equipotentials and potential: place charges and see how the field spreads
Every electric charge creates a field around it that pushes other charges. You cannot see the field, but you can draw it: field lines show where it would push a positive charge, and equipotentials join the points at the same voltage. With them you can understand why arcs strike at points, why a car protects you from lightning and why medium-voltage cables have a screen.
Drag the charges to move them. Tap an empty spot (or hover with the mouse) to measure the field and potential there; the blue arrow is the field direction. Red is positive potential and blue negative. Charges are in nanocoulombs and the canvas is 60 cm wide.
Two charges attract if they have opposite signs and repel if they are alike, with a force that falls with the square of the distance:
\[ F = k\,\frac{q_1\,q_2}{r^2} \qquad E = k\,\frac{q}{r^2} \qquad V = k\,\frac{q}{r} \qquad k \approx 9 \cdot 10^9\ \text{N·m}^2/\text{C}^2 \]
If the field exceeds a certain value, the insulator stops insulating and an arc strikes. In dry air with a uniform field, that limit is about 3 kV/mm. But the field is hardly ever uniform:
| Material | Approximate dielectric strength |
|---|---|
| Dry air, uniform field | 3 kV/mm |
| Transformer oil | 10 to 20 kV/mm |
| Impregnated paper | 10 to 40 kV/mm |
| PVC | 15 to 30 kV/mm |
| Cross-linked polyethylene (XLPE) | 20 to 50 kV/mm |
| Mica | 50 to 100 kV/mm |
These are short-time test values. Insulation works far below them, because it ages with heat, humidity and partial discharges.
Inside a conductor in equilibrium the field is zero: the free charges move until they cancel it. That is why the whole surface of a conductor is at the same potential and field lines meet it at right angles. A closed metal box shields its interior from outside electric fields: it is a Faraday cage. That is why a car protects you from lightning, screened cables reduce interference and metal enclosures are earthed.
To see the field inside capacitors and cables, with real values, go to field in capacitors and in cable insulation.